[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: Eclair Cameras: ACL 1.5 motor vs. 2 motor
I suppose that when I am inching the knob, it allows (as you say) the
claws to find the sprocket holes, thus eliminating the noise I would
have otherwise heard had I not inched it properly. In other words,
maybe when the sprocket holes are engaged correctly that is when I hear
the least noise coming from my camera.
Anyway, I've run a lot of film through my camera, and I haven't had any
problems with it. I'll be sending it off to get overhauled in the near
Warren Yeager wrote:
Don't know why that would be.....the manuel says to load the mag and
inch the knob until the claws find the sprocket holes....after that, to
understanding, the motor just turns 'round and 'round and if it has self
parking....stops with the shutter closed and the mirror in
you motor be out of alignment?
Warren Yeager, SOC
----- Original Message -----
From: "Michael Welle" <firstname.lastname@example.org>
Sent: Monday, March 10, 2003 12:48 PM
Subject: RE: Eclair Cameras: ACL 1.5 motor vs. 2 motor
> What I meant was that sometimes if I move the inching knob ever so
> slightly in one direction or the other, the camera becomes quieter when
> it is running with film loaded.
> Mark wrote:
> > In a message dated 3/10/2003 11:59:37 AM Pacific Standard Time,
> > email@example.com writes:
> > > With my 1.5 motor I adjust the inching knob to quiet the camera when
> > > film is loaded.
> > Can you explain what you mean? Thanks. Mark.
> Michael Welle
This email was sent to: firstname.lastname@example.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?a84xYK.bdbHPA.ZWxyb3Jv
Or send an email to: EclairACLemail@example.com
TOPICA - Start your own email discussion group. FREE!