[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Eclair Cameras: ACL 1.5 motor vs. 2 motor
Don't know why that would be.....the manuel says to load the mag and then
inch the knob until the claws find the sprocket holes....after that, to my
understanding, the motor just turns 'round and 'round and if it has self
parking....stops with the shutter closed and the mirror in place.....could
you motor be out of alignment?
Warren Yeager, SOC
----- Original Message -----
From: "Michael Welle" <email@example.com>
Sent: Monday, March 10, 2003 12:48 PM
Subject: RE: Eclair Cameras: ACL 1.5 motor vs. 2 motor
What I meant was that sometimes if I move the inching knob ever so
slightly in one direction or the other, the camera becomes quieter when
it is running with film loaded.
> In a message dated 3/10/2003 11:59:37 AM Pacific Standard Time,
> firstname.lastname@example.org writes:
> > With my 1.5 motor I adjust the inching knob to quiet the camera when
> > film is loaded.
> Can you explain what you mean? Thanks. Mark.
This email was sent to: email@example.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?a84xYK.bdbHPA.ZWxyb3Jv
Or send an email to: EclairACLfirstname.lastname@example.org
TOPICA - Start your own email discussion group. FREE!