[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Eclair Cameras: Cameflex base scratch

Good Feedback Schepperstop
For those who want to scratch test.  I use unexposed film in hundred foot loads and inpect it with either a linen tester loupe at 10x or you can use an old lens off of a 16 mm projector or for that matter any cmount 50mm.  Look through the front and it magnifies the film surface so you can see any minor defect in the surface.

Schepperstop´s technigque is great  I use a similar approach but visually inspect the film without processing.

----- Original Message -----
From: CJ Schepperstop <cjs@sound.net>
Date: Monday, July 14, 2003 12:29 pm
Subject: Re: Eclair Cameras: Cameflex base scratch

Here is the procedure of doing a scratch test. Run some new film throughthe camera and stop the running before the end of the roll.

This email was sent to: elroro@propagandaindustries.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?a84xYK.bdbHPA.ZWxyb3Jv
Or send an email to: EclairACL-unsubscribe@topica.com

TOPICA - Start your own email discussion group. FREE!