[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Eclair ACL Eclair rosettes

Yep I came up with the same measurements as well. I'm measuring an ACL 1 rosette. My guess is the ACL 1 and 1.5 is more common. The rosettes can be interchanged on the grip so one could remove the old non-standard one and maybe put one of Les's in there.

There is also an ACL II side mount available here,


It's one of Robert Latimer's auctions. You might drop Robert @ the Moviehouse a line and see if he knows what grip it will fit.

Les Bosher wrote:
Thanks Mark.
Those measurements are the same as the ones I've got.
I suspect that the larger Rosettes are non standard.
I'll be making these in bulk for my handgrip , which will then be able to fit on camera or support bars (better balance or if you haven't got the bit on the camera )

----- Original Message ----- From: Mark To: EclairACL@topica.com Sent: Saturday, September 29, 2001 10:18 AM
  Subject: Re: Eclair ACL Just got mine last night

ACL II Handle Rosette specs outer diameter = 24mm inner diameter =20mm # teeth = 40 center hole = 10 mm diameter 2 screw holes for 2.5mm screws at 180 degrees from each other; recess for screw heads is 4.5mm --- the recess starts butted up against the edge of the rossettes right up to the edge of the center hole (just shy of breaking through to center). SOMEONE ELSE SHOULD DOUBLE CHECK MY MEASUREMENTS! Thanks.

EASY UNSUBSCRIBE click here: http://topica.com/u/?a84xYK.a9svPI
Or send an email To: EclairACL-unsubscribe@topica.com
This email was sent to: elroro@propagandaindustries.org

T O P I C A -- Register now to manage your mail!