[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Eclair ACL Motor feedback



A phase button would be nice...but then again it comes on the Tobin controller and other controllers. According to the Tobin website, his milliframe controller works with a variety of cameras so I would think it would be compatible as long as the motor generated the correct reference signal (or is it the other way around?).

Frankly I would be scared to death to run my camera's 30 year old mechanism at 75fps. I'm just slightly older than that myself and I know I don't run at the frame rates I once did.

It would be nice if the motor had the facility to brew coffee. Might come in handy on those long cold shoots up here in Minnesota:-)

Ray


Warren wrote:
I've run 75fps with full 400' loads several times with great results.  I
only use it for short bursts, obvously, but I've had no trouble.

The 29.97 is crucial here in the states.  It solves SO many problems.  A
phase button would be cool too.....

(shootin' a pilot with my ACL this week!)

Warren Yeager, SOC

==^================================================================
This email was sent to: elroro@propagandaindustries.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?a84xYK.a9svPI
Or send an email to: EclairACL-unsubscribe@topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================