[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: RE: Eclair ACL mag roller lubricants
... well it is almost MARCH; so how about butter?
I have heard that sewing machine oil makes for a good camera lubricant.
I used a little 3 in 1 oil on a sticky roller I had and it worked fine.
I would think any decent quality light oil should work. I would stay
away from anything that has teflon in it though. Teflon lubes tend to
migrate and that wouldn't be good around the film path.
If you lube your camera rollers, use it sparingly. The stuff gets all
over the place if you are not careful. I would actually remove the
rollers rather than trying to put a drop of oil on it and working it in.
When I did my roller, I removed it, took a Q-tip, put a few drops of
oil on it, and rubbed it on the roller shaft until it was lightly
coated. Then I replaced the roller, wiped away any excess with denatured
alcohol and it's been fine ever since. I hope this helps.
ps. If you are really particular about what you use on your camera, ARRI
makes a very good light oil and camera grease that I have since used on
my Arriflex M and it works very well. I ordered it from ARRI LA. Email
me if you want the phone#. It's not too expensive (which is unusual
considering it's an ARRI product).
Nick Peterson wrote:
Can anyone recommend a type of grease/oil for lubricating the rollers
inside the mags? How about sewing machine oil?
Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/
Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/
This email was sent to: email@example.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?a84xYK.a9svPI
Or send an email to: firstname.lastname@example.org
T O P I C A -- Register now to manage your mail!