[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Eclair ACL Battery Options



I just used a rubber strain relief, and tied a good ole granny knot in the
wire inside the case which keeps the pressure off the solders inside the
battery.  It works fine, and the velcro scheme makes changing batteries very
fast.

Warren Yeager, SOC
www.warrenyeager.com
----- Original Message -----
From: "Wade Ramsey" <wramsey@bju.edu>
To: <EclairACL@topica.com>
Sent: Friday, November 16, 2001 12:46 PM
Subject: RE: Eclair ACL Battery Options


Sounds like a good idea to me.  No reason why the XLRs couldn't
support a set of AAs so long as the XLRs are mounted firmly.

Can you get a panel mount 4XLR that is not recessed?  It could
protrude from the battery pack, which would allow the pack to hug the
camera, reducing the leverage on the connector.

Wade K. Ramsey, DP
Dept. of Cinema & Video Production
Bob Jones University
Greenville, SC 29614

>>> cinesota@yahoo.com 11/16/01 3:31:54 PM >>>
Hi Warren,
What if I mounted female xlr socket into the case itself and just
plugged it directly into the male xlr on the pilotone module?  Do you

think the xlr connector is robust enough to handle it?  The batteries

are pretty small and not very heavy.

Ray


Warren wrote:
> NP-1's are pretty big.  They're what, 8 inches long?  The little
> batteries
> you built are much like mine, only I used 10 1.2v NiMh batteries
giving
> me
> 12v, you used 12 giving you 14.4v.  You've got a little more juice,
but
> mine
> work fine.  I also have an XLR pigtail coming off my batteries.
>
> When I change mags, I take the batteries off the mags (they're
velcroed
> on)
> and let 'em dangle for a minute.  They don't get in the way.  I
have a
> good
> stress relief on the battery, and XL connectors are solid, so the
> pigtail
> can easily take the strain of hanging for a minute.  No problem,
really.
>  I
> justs used some zip cord for the cable.
>
> Warren Yeager, SOC





==^================================================================
This email was sent to: elroro@propagandaindustries.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?a84xYK.a9svPI
Or send an email to: EclairACL-unsubscribe@topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================