[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Eclair ACL Exp ON/OFF switch

I don't know if Topica allows small pictures???  Here's a picture of the switch on the front.

However there is no light meter in this camera.  I know because I have a 1.5 with the light meter.

Also of interest is the side of the motor?  Here's an image of it.

There is no inching knob like other ACL2's???  I don't know if this is an early model ACL2 or a late model.  The camera serial number is No.2947  The motor number is No.3261

>From Mark's email it sounds like the 'E' motor switch setting is for using an external speed control device like a Fisher controller???  In this regard, has anyone out there had the output switch on the base converted to a Fisher 11 pin?  I see in photos on AZ Spectrum's website (http://hometown.aol.com/azspectrum/acl.html), that they have done this conversion.  Any feedback on them or others who can do this conversion?  Costs???

Thanks for you help everyone!

Chris Bell
----- Original Message ----- 
From: "Mark" <super16acl@aol.com>
To: <EclairACL@topica.com>
Sent: Saturday, February 02, 2002 10:02 PM
Subject: Re: Eclair ACL ACLII Manual

> Chris -
> My ACL II Base seems to have different markings from yours (Hmmm?). There is 
> no EXP ON/OFF beside the power switch, although I would guess it turns the 
> EXPOSURE METER on and off.
> As for the "E" setting, mine says "MOTOR EXT. SYNCHRO - WITH/WITHOUT" and  
> presumeably allows the use of either the ACL II Motor (which has the ability 
> to receive an External Crystal Speed ), or the ACL 1.5 Motor, which didn't 
> have the ability to accept external sync.
> Which markings do other ACL II owners have?
> Anyone have a xerox of the manual?
> Mark.
> > 

This email was sent to: elroro@propagandaindustries.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?a84xYK.a9svPI
Or send an email to: EclairACL-unsubscribe@topica.com

T O P I C A -- Register now to manage your mail!

JPEG image

JPEG image