[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Eclair ACL light leaks?
Robert, I've experienced ever downfall of the ACL. The light leak I had was
thru the filter section of the top of the magazine latch assembly cover.
Take the cover off, break off the filter holder, cover the filter slot on
the camera body with black electrical tape, cover that with black silicon
glue, then glue a cut piece of black foam to the inside of the cover to fit
over the black glue and black tape. This should do it. Oh, by the way,
blacken everything inside the camera except the ground glass and mirror. If
you want a real pro to work on the mag latch to keep the mag from falling
off, Contact Bernie O'Dortery in Boston. He does great work for a fair
----- Original Message -----
From: "Robert Morein" <firstname.lastname@example.org>
Sent: Thursday, April 18, 2002 9:29 AM
Subject: RE: Eclair ACL light leaks?
Has anyone ever actually experienced a light leak with an ACL?
This summer I pushed the envelope and had no problems.
The only anatomical weakness I know of with the ACL magazine, at least the
French, is that there is a possible leakage path through the front of the
mag around the gearbox casting, then through the slot for the footage
counter arm. The gearbox casting is light sealed by a glued piece of foam
soft rubber, but I have seen a mag where the glue dried out and the rubber
dislocated. However, this is not a leak that would be prevented by taping
the mag door.
The Arri magazine design uses a rubber O-ring in the groove of the mag
If the O-ring is in good condition, it is generally said that the camera
does not require taping.
Back to the question -- has anyone ever had a piece of fogged film from a
This email was sent to: email@example.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?a84xYK.a9svPI
Or send an email to: EclairACLfirstname.lastname@example.org
T O P I C A -- Register now to manage your mail!