[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Eclair ACL ACL Support Rods ,
How long are the rods/support rods?
What physical length lenses are accomodated, in terms of mounting a matte box?
----- Original Message -----
From: Les Bosher
Sent: Thursday, May 02, 2002 5:40 PM
Subject: Eclair ACL ACL Support Rods ,
The Support interface fits under the camera using the 3/8W Tripod Thread . On the ACL I a small side plate stops it twisting .
On the ACL II , 2 bosses locate in the counterbores of the base fixing screws .
There are 2 new tripod holes in the plate , which assists balance.
The Support Bars are standard Arri spacing 15mm dia., made of Anodised Aluminium attached to a cross bar which attaches to the front of the interface plate with one knurled head screw, which permits centering for R or S 16 .
The Bars are standard , so they can be put on any camera I produce an interface for . ACL , NPR , Cameflex , Bolex , Sony , Canon XL1 etc.Even on your Filmo if so required.
It's a tried & tested system that I have made for about 20 years.
Hope that makes sense . I guess the next upload on my Site should be some Support pictures.
I make bridge pieces for lens supports as well .
Also the hand grip which has to be tried to be appreciated, matte box , & Follow Focus ( very soon )
I haven't seen the OEH version , but you only need a screwdriver ( or coin ) to fit mine .
Web Site : - www.lesbosher.co.uk
Tel/Fax :- 01685 811422
You can now pay online using PayPal
This email was sent to: firstname.lastname@example.org
EASY UNSUBSCRIBE click here: http://topica.com/u/?a84xYK.a9svPI
Or send an email to: EclairACLemail@example.com
T O P I C A -- Register now to manage your mail!