Re: Eclair Cameras: ACL Techs

[Wade Ramsey <wramsey@bju.edu>]

Post it to the group so we can all see it!

Wade K. Ramsey, DP
Dept. of Cinema & Video Production
Bob Jones University
Greenville, SC 29614

> > > wy@warrenyeager.com 2/27/03 2:02:38 PM >>>
I'll take a shot of it so you can see it, but I only made the one, and it took me many months.  It's a nifty piece, though.   It''s a flat piece, with a raised lip on the front which corresponds to the curved front of the camera.  It extends out in front of the camera and forms a T on which is mounted a bracket into which the rods are fit.  The bracket itself is mounted on two short rods, so it can raise or lower a little.  

I'll try to shoot it this afternoon and send you a pic....

Warren Yeager, SOC
www.warrenyeager.com 
 ----- Original Message ----- 
 From: august loessberg 
 To: EclairACL@topica.com 
 Sent: Thursday, February 27, 2003 8:05 AM
 Subject: RE: Eclair Cameras: ACL Techs


 send me some photos of your bridge plate I may want to buy one 
   -----Original Message-----
   From: Warren Yeager [mailto:wy@warrenyeager.com] 
   Sent: Wednesday, February 26, 2003 7:05 PM
   To: EclairACL@topica.com 
   Subject: Re: Eclair Cameras: ACL Techs


   Good to know.....I'm very close to Electo Optical House, and I know George Zorzoli.   He's been taking care of my ACL since I bought it.

   I've been making custom accessories in a machine shop (and learning a little about machining).  I built a bridge plate for 15mm x 100m rods, and I'm currently making a bracket for a follow focus unit I bought on Ebay for $200.   It's awesome to have such an incredible resource!

   Warren Yeager, SOC
   www.warrenyeager.com 
     ----- Original Message ----- 
     From: august loessberg 
     To: EclairACL@topica.com 
     Sent: Wednesday, February 26, 2003 1:14 PM
     Subject: RE: Eclair Cameras: ACL Techs


     I an a professor at the University of Oklahoma school of journalism and live in Oklahoma City, OK If you need a postal address let me know.  I can repair and adjust ACL and ARRI as well as install Mark's s16 kit or new shutters. 
       -----Original Message-----
       From: Warren Yeager [mailto:wy@warrenyeager.com] 
       Sent: Tuesday, February 25, 2003 12:18 PM
       To: EclairACL@topica.com 
       Subject: Re: Eclair Cameras: ACL Techs


       Where are you located, August?

       Warren Yeager, SOC
       www.warrenyeager.com 
         ----- Original Message ----- 
         From: august loessberg 
         To: EclairACL@topica.com 
         Sent: Monday, February 24, 2003 1:25 PM
         Subject: RE: Eclair Cameras: ACL Techs


         My Name is August Loessberg and I can service your ACL or ARRI  email me at jerdog@ou.edu 
           -----Original Message-----
           From: Mark [mailto:super16acl@aol.com] 
           Sent: Friday, February 21, 2003 4:01 PM
           To: EclairACL@topica.com 
           Subject: Eclair Cameras: ACL Techs


           Names to most frequently come up are Les Bosher (England), Bernie O'Doherty (Boston), Optical Electro House (Los Angeles), Planning Camera (France), Aranda Group (Australia), Du All Camera (New York).  And I believe JERDOG once mentiioned that he is servicing ACLs ... check the list archives. There's also a place in Vancouver.

           Anybody have other Techs I've missed? 

           There is a list with some e-mail addresses on my site:

           members.aol.com/super16acl/techs.htm 

==^^===============================================================
This email was sent to: elroro@propagandaindustries.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?a84xYK.bdbHPA.ZWxyb3Jv
Or send an email to: EclairACL-unsubscribe@topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^^===============================================================