Eclair ACL 14.4v and 400' mags

[cinesota@yahoo.com]

Hey all,

I concur with Mark's theory about using a 14.4v battery with the small 
ACL motor.  I found that combined with the English designed 400' mags 
that my ACL has been able to reliably pull a 400' film load.  I wouldn't 
try it with the French mags though.  Even with more voltage you would 
probably burn out your motor.  A couple of other things worth 
considering if you are using the small motor with an English 400' mag... 

First, I would make sure your camera is in tip top order and properly 
lubricated.  The motor is already at it's limit and any undo stress 
might cause problems.  What I'm gettin' at is don't try this with that 
gem you found on ebay until you've had a qualified tech check your 
camera and make sure everything is up to spec.  
Secondly, I would allow your camera to "cool down" if you just shot a 
long take.  Don't try to squeeze off mag after mag or you might overheat 
the motor.  The lil guy is trying as hard as he can and it doesn't hurt 
to give the motor a breather once in awhile.

Hopefully someone will find this info of use.  Your mileage may vary.  
Most of it's just common sense.  Maybe it will keep us small motor guys 
going until we can afford Robert's motor or the Tobin unit.

By the way, I too am interested in Mark's onboard battery holder (but 
Mark knew that already).

Cheers,
Ray

ps. To give credit where credit is due, I believe it was Wade that first 
mentioned using 14.4 volts with the ACL.  Thanks Wade!

==^================================================================
This email was sent to: elroro@propagandaindustries.org

EASY UNSUBSCRIBE click here: http://topica.com/u/?a84xYK.a9svPI
Or send an email to: EclairACL-unsubscribe@topica.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================